top of page


SLPH40 Render

EHP is proud to manufacture our all in one skid mounted SLPH40 units.

These units are a one-of-a-kind combination of a light tower, generator, and heater which can deliver high volume heated air at 500,000 BTU’s. For added heat efficiency re-circulation is as easy as connecting another duct to the unit.


The SLPH40 can heat a space with dry, hot, breathable air while illuminating the work site and powering other electrical equipment to get your work done.


Our variable heat output can be adjusted to your preference increasing fuel savings when full power is not required. The automatic power limiting feature makes overloading the generator impossible. The SLPH40 will deliver power where needed. The light tower is customizable from 2 lights up to 16 lights for complete illumination of your workplace.


The fuel savings from a SLPH40 unit can save up to $##,000/month (at $1.00 per liter) and the C02 footprint is reduced by ## tons/month (Compared to running a generator, light tower, and indirect flame heater).

  • Output: 500,000 BTU

  • Volume: 3000 CFM

  • Pressure: 9 Inches of WC

  • Delta T Temperature: 0° F @inlet to 212° F @Outlet

  • Fuel: 3.3 Gallons of Fuel/Hr (Full Load) 600 gal.

  • Electrical Area Classification: General Purpose

  • Dimensions: 243" L* 90" W * 150" T

  • Weight: 4,300lbs Empty, 6,450lbs Full

  • Power Management System

  • Emergency, High Temperature Overspeed, & Low Oil Shutdowns

  • 180 Hours of Operation/Tank (Full Load)

  • 110% Fluid Containment

  • 5 Point Stabilization System

  • Forklift Pockets and Lifting Points

  • Sound Attenuated 85dB @10ft

  • Low Maintenance

  • 100% Flameless Breathable Hot Dry Air

  • Light Tower Pin on/off @ 31 Feet Tall

  • 4, 8, or 16 Lights @ 24500 Lumens/light

  • Video Surveillance

  • GPS Tracking

  • Remote Trouble Shooting/Monitoring

  • Voltage: 480V or 600V

  • Blower: 28 Inches of WC (1 PSI @2500 CFM)

bottom of page